Blue Screen Error Windows 10

Fixed: how to fix a computer

Download article

Download article

If you can’t remember your BIOS password or want to directly revert to the original BIOS version after a failed update, you can simply reset your PC’s BIOS settings. We’ll show you how to reset your PC’s native BIOS from the BIOS itself, as well as how to remove and reinstall the onboard CMOS battery on your motherboard. Keep in mind that resetting the BIOS may void your PC’s warranty. If you are sure, do not ask for support from your computer before purchasing.

This article was co-authored by Luigi, Oppido, and wikiHow contributor Lloyd Jack. Luigi owns and operates Pleasure Computers point in Cruz, Santa, California. Luigi has over 25 years of experience in recovering, computer data, removing and updating herpes viruses. He is also the host of the computer show! The Man aired on KSQD for two years, major coverage of California.

The wikiHow tech team also followed the instructions in the article and made sure they worked. Name=”Questions_and_Answers_sub”>

  1. 1

    Restart your real computer. Open

    click the durability icon

    and click on it

    Restart

    .

    [1]

  2. If your computer is indeed locked, click on the lock screen then click on the power icon in the lower right corner of the screen and click on Restart.
  3. If you are sure that the computer is turned off, press the power button on the computer.
  • This

    2

    wait for the main computer’s splash screen to appear.

    Once the splash screen is up-to-date, you’ll have a very limited window where you can click the settings button.

    [2]

    • if you find that “Press [key] to enter settings” or something like that is flashing at the bottom, including the screen, and then disappears, you should restart your computer and try again.
    • < /ul>

    Advice. It’s best to start holding the settings button as soon as the computer starts to restart.

    Advertising

  • 3

    Press several timesPress Delete or F2 to enter the configuration.

    The key you will be prompted to press can also be if different; it is, use this key instead.

    [3]

  • If the link or del F2 doesn’t work, try F8 F10 Esc or †¹ tab.for
  • Normally, BIOS entry uses the most important "F" keys. They are all located at the top of the keyboard, although if you press a key while holding fn, it's pressed and determined, you can find the appropriate "F" key.
  • You can verify your computer's bios key in the manual for your main computer model or online support site.
  • 4

    Please wait name="step_1_4"> while the BIOS helps to boot.

    After a successful organized key press, the BIOS will load. It only takes a few forces to do this. When the boot process completes, the person will be redirected to the BIOS settings menu.

    • If you can't access your incredible BIOS because you're at home with no password or it suggests you're corrupt, use onefrom methods other than those listed in this article.
    • < Name="step_1_5"> /ul>

  • 5

    Look for the Default Settings option.

    The location and wording of this sentence is different for each BIOS, to be honest, it's usually called "Restore default settings", "Factory settings to "Default settings, default" or something similar. This can be a tablet or an operation listed with a row of navigation keys.

    • If your good BIOS does not support this approach, use one of the following methods after this section.
  • 6

    In Preferences select "Load and Defaults" drive option – Enter.

    This is to select them using the arrow keys;

    Click
    ↵ Enter

    will normally reset the BIOS immediately.

    • Again, the product label you choose will most likely be different for each BIOS.
  • you

    7

    Save your changes and confirm your choice if necessary. This is often combined with the BIOS exit process. Your computer will restart automatically. Ifyou need to change the BIOS settings after the BIOS restart, you may need to restart your computer and enter the BIOS for the changes to take effect.

    Advertising

  • Restart your computer.
    start again
    [1]

  • When the computer is turned off, click on the lock screen, then click on the power icon in the lower right corner of the screen and simply restart the computer.
  • If your computer is already turned off, press the power button on your computer.
  • Wait until the first boot screen of the computer appears.

    Once the splash screen is displayed, you have a very limited in-case window where you can click some configuration buttons.

    [2]

    • If you see the message "Press [key] to set Enter" or something similar flashes at the bottom of the screen and then disappears, try again. A few

    press Delete or F2 times to access the configuration.

    The hotspot you're prompted to click is likely different too; will If so, use the who factor.

    insteada hundred of it.

    [3]

  • if suppr or F2 doesn't work, F8 look for F10 Esc or †¹ Table
  • Usually, the "F" keys are used to enter the BIOS. They are at the top of the keyboard, basically you need to find the port and the Fn key while pressing the right "F" key.
  • You can confirm your device's BIOS key in your computer model manual or online support site.
  • Wait for your BIOS to load.

    After successfully pressing the general setup button, the BIOS will load. This should last a limited number of times. Usually, when the boot is complete, you will be redirected to the BIOS settings menu.

    • If you are unable to enter your BIOS because you are password protected or something is corrupted, use one of the other methods in my article.
    • < /ul>

      Locate the Default Configuration option.

      The location and wording of this option, of course, varies for each BIOS, but in relation to each other they are usually called "Reset - Default", "Factory Default", "Ondefault settings” or something similar. tabs, and next to the buttons there may be a view option.

      • If your BIOS does not have the option, use one of the following types of procedures in this section.

      Select "Load default settings" by and press →Enter.
      †µ Recording

      • Again, the ability selector label is likely to be different for each bios. Name="step_2_1">

      1. Can you repair Windows 10 from BIOS?

        No, Ne bios can't help you. BIOS is independent of the operating system and has absolutely nothing to do with Windows assembly. your Use the Windows Recovery DVD or boot the media to USB and run the https://biosguy.com tool from there.

        1

        Turn off the current computer.

        Use the Start menu labeled Turn Off, press or and leave the computer on until it turns off.

        • If you're only using a desktop computer, you can usually disable all of our processors entirely by flipping the switch on the back of the processor case.
      2. 2

        name="step_2_2"> Disconnect the new computer from all power sources. This includes wired desktop power and wired laptop charging.

      3. you

        How do I fix the BIOS on my computer?

        Navigate to your payment settings in the start menu by clicking on the gear icon.
        Click "Update & Security" select and "Restore All" on the left sidebar.
        you will see a specific "Reload option now" under the "Advanced setup" heading. Click on it when you're ready.

        3

        Can you fix a BIOS?

        In some cases, you can fix corrupted BIOS issues by simply updating the BIOS. When updating the BIOS, make sure your primary computer has a constant power source. If the update process is interrupted, you may permanently damage your computer. You must determine the BIOS version you are using.

        remove the battery from the computer if necessary. If you are using a laptop or tablet (or desktop computer with backupbattery), please remove the battery before proceeding.Name="step_2_4">



      4. 4

        Discharge static electricity before proceeding.

        Before disassembling your trusty computer, discharge static electricity from it before disassembling it. Touching the motherboard or other internal computer components that are not properly grounded can cause permanent damage to the computer.

      5. 5

        Open the case.

        You need to access the motherboard. Be extremely careful when working with the internal computer, although electrostatic discharge can easily destroy reactive components.